- optel-texys 用于非接触式动态扭矩计算的独立工具 / 基于使用光纤传感器的扭转角测量 / 非侵入式,易于安装,可在 EMC 和 ATEX 环境中作
- optel-texys 传感器通道分线盒
- optel-texys 用于简化和经济地测量循环平稳现象、失循环、滑移、扭转振动、弯曲、扭矩、角速度变化。 当您要诊断的旋转部件不能包括精密的发声轮或机械加工和对比标记或自然载体(如孔、齿、直接雕刻)
- optel-texys 光纤探头
- optel-texys 传感器 测速、非循环、扭转振动、滑移、角速度测量 非接触式测量
- 纠偏导正架,纠偏导正系统,纠偏导正系统的纠偏控制,光电纠偏系统导正架纠偏系统,张力自动控制系统
- 现货库存低价清仓处理-MKS质量流量计-HORIBA质量流量计-日立质量流量计-普发真空计
- 劳易测安全解决方案的产品经理Matthias Bristle将向您介绍具体的方案。
- 立式转盘曲面印刷机
- 意大利 FINDER
业务代表:陈先生
电子邮件:myhongyuan@foxmail.com
地址:深圳市光明区松柏路5065号华强大厦B栋201

Plug detection during vehicle painting
目录:New发布时间:2021-11-12 20:49:54点击率:1021
Plug detection during vehicle painting
Description
Located on the roof of a small van is a series of holes which, depending on the configuration, are fitted with or without plugs. Following CDP (cathodic dip painting; also referred to as cataphoresis), the vehicle is painted beige. The diameter of a hole is approximately 10 mm. Black plastic plugs are used to seal the holes. Both the holes as well as the plugs must be reliably detected as the vehicle bodies pass by. Because the van is available in two heights, it must be possible to check both heights with the sensor. Furthermore, the sensor must cover a large measurement range in order to compensate for tolerances in the process – for example, if the vehicle body is positioned at a slant on the skid transport system. Following the check, the sensor should output a digital signal to the PLC.
Solution
The LRS 36 light section sensor is used. It can cover a range up to 600 mm wide and can thereby also handle height differences on this order in the vehicle body. With the scanning rate of 100 Hz, it can reliably detect a 10 mm hole at traverse rates of up to 15 m/min. Testing showed that the light section sensor can reliably detect both the hole as well as the plug.
使用的产品
-
行业/领域
Automotive industry (painting)
-
任务
Quality control, Presence inspection
-
应用
Plug detection during vehicle painting
没有了!
没有了!